Replace LED Bulb in a Compaq Presario F500

The LED screen in your Compaq Presario laptop is powered by a bulb that is located directly behind the screen. If your screen is dark or is generally not functioning properly, it is likely the result of a blown backlight bulb. The good news is that you don't need to pay a computer tech to fix the problem for you, as you can replace the backlight yourself.

1). Power off your F500 and unplug the AC adapter power cable.

2). Slide the rectangular battery out of its compartment located on the underside of the computer.

3). Open the display screen and use your Phillips screwdriver to remove all screws on the sides and corners of the plastic frame that surrounds the display screen.

Read More

Benefits of a Glossy Laptop Screen

While traditional desktop computers afford users the option of installing a wide variety of monitors, your laptop computer displays its graphical user interface on its built-in screen, one whose size corresponds to that of the computer itself. Among the options you have when you purchase a laptop is the choice between a glossy or matte screen.

Glossy vs Matte Screens

When you order prints of photographs, you have the option to choose between glossy or matte finishing; in other words, photos that either have or lack sheen. Similarly, laptop screens can be either shiny, like the body of a car, or matte, like a piece of paper. If you're unsure as to whether a given laptop screen is glossy or matte, turn the computer off and look into the screen.

Read More

Repair the Lid Close Switch on a Toshiba Tecra A2 Laptop

Switch on a Tecra A2 laptop is the button that communicates when to turn off the screen when you close the laptop lid. A dirty close switch might get stuck inside the laptop and interrupt power supply from the inverter board. If your screen remains blank when the laptop is open, you might have a jammed close switch.

1). Use your index finger to press down on the close switch. Apply force to unstick a sticky close switch.

2). Dislodge dirt and debris with a pair of tweezers. Maneuver the tweezers around the close switch to remove buildup.

3). Spray the base of the close switch with compressed air. The burst of air may dislodge debris that couldn't be removed by tweezers.

Read More

What Does the Inverter Do on Laptops?

Electricity is delivered to your home as alternating current, but laptops and many other electronics use the simpler direct current. The power inverter on your laptop cord is responsible for switching current from alternating to direct.

Direct Current

Direct current (DC) electricity can be envisioned as flowing through conductive material in much the same way water does. The current moves through a circuit in one direction and at a constant voltage. This greater uniformity of current makes it ideal for powering laptops and other electronics.

Read More

Signs of a Laptop Overheating

Overheating a laptop can cause serious problems. Look out for the warning signs and you may be able to head off the problem before it becomes an issue. Sometimes overheating is caused by insufficient ventilation below the computer; elevating it or adding a cooling station can fix the problem.

Excess Heat

The first sign of a laptop overheating is an abnormal amount of heat coming from it, especially if it is in an area of poor ventilation, such as a couch, bed or on a flat lap with the user's knees closed. When a computer overheats, the keyboard will start to heat up, and the bottom will feel hot rather than warm to the touch.

Read More

The Best Ways to Save Laptop Batteries

 Modern laptop personal computers have processing technologies and powerful software applications that have become so advanced as to replicate the desktop PC experience. To maximize the mobile computing benefits that laptop PCs offer, users can keep in mind several measures to both conserve the capacity of their laptop battery, and extend the battery's life for as long as possible.

Background

According to PC Magazine, a typical laptop battery will enable the PC to run at full power for a few hours. In most cases, after about 18 to 24 months, laptop users will notice a steady degradation in the performance of the battery, and that the battery will run the PC for less and less time after each recharge. This is because lithium ion batteries have a limited number of charge cycles -- meaning a limited number of times they can be taken from a full charge to a full discharge -- before they aren't able to hold power on their own.

Read More

Turn on Number Lock on a Laptop

Eliminating the separate number pad is one of the changes most manufacturers make to save space in a laptop computer case. This allows the keys on the laptop keyboard to be large enough for most people to operate comfortably. The number pad didn't disappear completely though. It has been integrated with the standard keyboard with some of the keys doing double duty.

1). Locate the "FN" key on the keyboard. In most cases, it is between the "Ctrl" key and the "Windows" key on the lower-left side of the keyboard.

Read More

Kensington Lock Instructions

The Kensington Security Slot is a small locking mechanism used on devices, such as laptops, computer monitors and video game consoles. The Kensington lock then connects to this slot to lock the device securely to a desk or other solid surface to prevent theft. The locks use either combinations or keys for a convenient way to protect your expensive equipment. While not unbreakable, securing your valuables with a Kensington lock can save it from an opportunistic thief.

1). Secure the security wire of the Kensington lock to a large, solid surface. This can be a desk, bedpost or any similar heavy object that is not likely to get stolen. Wrap the security wire around the object and slide the lock end through the loop end of the wire.

Read More

Restore Function on an HP Laptop not working

What Happens When You Lose the PC Restore Function on an HP Laptop?

Hewlett Packard laptops come with several tools for backing up and restoring information, including the ability to completely restore the entire system to its factory settings. If these functions are lost, users must access the default Windows tools for restoration or use other third-party software.

Cause

The primary "C" drive of an HP laptop comes with a built-in partition labeled "HP Recovery." This partition stores all the information required for the HP restoration functions. Removing, renaming or tampering with the drive causes these tools to become unavailable.

Read More

Use a Laptop IR As a Remote Reader

 The IrDA protocol, created by the Infrared Data Association, specifies how two devices can communicate using a line-of-sight, infrared connection over short distances. Many laptops include an IrDA-capable hardware transceiver in their factory configurations. IrDA transceivers are typically located in the front edge of the laptop. You can configure the infrared (IR) port on your laptop so that it becomes capable of wireless communication with cellular phones, PDAs and other mobile devices.

Read More

Upgrade a Dell Inspiron From WEP to WPA

WEP and WPA are forms of security passwords for a wireless Internet connection used to prevent other people from detecting and connecting to your personal home router. WEP is an older form of security that is not as secure as the newer WPA form. If your Dell Inspiron computer is connected to a wireless router that currently uses WEP, you can connect into that router and change the security form to WPA for stronger encryption.

1). Launch your Internet browser program on your Dell Inspiron.

2). Type your router's IP address in the browser's address bar and press the "Enter" key on your keyboard to launch the router's login prompt. You may need to consult your router's manual for information on your router's default IP address.

Read More

Uninstall a Synaptics Pointing Device

Windows 7 computers are pre-installed with touchpads that act as mice. The Synaptics Pointing Device driver becomes corrupt or interferes with another mouse that you are using. If this occurs, one option is to uninstall the Synaptics Pointing Device driver. Be warned that this will render the touchpad unusable, but you can always reinstall the driver later if you decide you need it.

1). Go to "Start" and type the command "devmgmt.msc" in the blank box above the "Start" button. Press the "Enter" key. This will bring up the Device Management box.

2). Type in the administrator password or click the "Continue" button.

Read More

Reset a Laptop

You're working on an important document, making great progress -- when suddenly your laptop freezes. The mouse won't move, pressing Ctrl+Alt+Delete does nothing, and all the hard work you've done is lost. For some reason, this keeps happening. Virus scanners detect nothing, disk defragmenting didn't work -- your laptop still freezes. The last resort, short of wiping the hard drive clean, is a hard reset. A hard reset will restore certain settings back to factory defaults, which may be enough to fix your problem.

1). Turn off your laptop by clicking "Start" and then "Shutdown." If your laptop is frozen, hold down the "Power" button until it turns off.

Read More

How to Clean a Trackpad

 If you have purchased a second-hand laptop, or you simply like to keep your current laptop as clean as possible, then you'll probably want to clean the trackpad. Because this part of the computer is constantly being touched by fingers, it's a good idea to disinfect it first. The good news is that cleaning the trackpad can be completed in a minute or two.

1). Wipe the trackpad gently with a disinfectant wipe. Make sure you cover all exposed areas of the trackpad. One coating is good. You don't want the trackpad to become too wet with disinfectant.

Read More

Replace a Laptop Keyboard

There are many reasons a laptop keyboard might become defective and require replacement. Whether it is from spilling a cup of coffee or overuse from writing a long novel or two, laptop keyboards usually do not last forever. If you take your laptop to a repair shop for a keyboard replacement, you should expect to pay a hefty premium to have the work done. On the other hand, if you are handy with a few basic hand tools, you can replace your laptop's keyboard yourself and save a lot of money.

1). Power off the laptop. Disconnect the AC adapter from the computer. Unplug any other cables or peripherals from the notebook. Close the laptop LCD screen.

2). Turn the laptop over so that it is upside down. Rotate the laptop until the battery on the bottom of the unit faces you. Slide the battery lock to the left and remove the battery from the laptop. Turn the laptop back over.

3). Open the LCD display screen on the laptop as far as it will go. The laptop display and base should be almost flat after opening the screen all the way.

4). Locate the keyboard edge cover or hinge cover just above the function keys on the top row of the keyboard. Position the awl at one end of the cover and insert it into the space between the bottom of the cover and the top row on the keyboard. Gently pry up the cover with the awl while working your way from one side of the laptop to the other. Gently lift the keyboard edge cover or hinge cover out of the laptop and set it aside.

5). Use the Phillips screwdriver to remove the keyboard retaining screws in the space from which you removed the edge or hinge cover. On most laptops, there are usually two to four screws that secure the keyboard. Set the screws aside in a safe place.

Read More

Convert PC Card to USB

How to Convert PC Card to USB

The PCMCIA (PC card) has been roundly replaced by USB devices. The sheer litany of products that are immediately functional, or require only a quick install, through the USB make multiple slots highly convenient -- for example, using a single laptop to listen to an iPod while printing off an external hard drive. Meanwhile, fewer and fewer devices use the PCMCIA format. Fortunately there are adapters available to convert a computer's PC card slot into an extra USB port.

1). Purchase a PC card (PCMCIA)-to-USB adapter. These can be found at computer and electronics stores or online. Make sure that the adapter specifically states that it is the correct type of adapter.

2). Push the card end of the adapter into the PC card slot. Make sure that the adapter is completely placed into the port.

3). Connect the USB device you wish to use to the USB side of the adapter. The adapter functions as a standard USB port, so use the device as you would through any other USB connection.

Read More

How to Fix a Wet Laptop

How to Fix a Wet Laptop

When electronic equipment becomes wet, it is imperative to dry each component completely before any attempts are made to restart the system and assess complete damage. If a laptop becomes wet, it may be possible to dry out the components and salvage the computer.

 

1). Unplug the laptop from any power source immediately. Soak up visible water on the surface of the laptop as quickly as possible with the absorbent and soft cloth. Keep in mind that you don’t scratch the screen.

2). Remove the battery form laptop and turn the laptop upside down and gently shake it to remove as much water as possible from the keyboard area.

Read More

How to Install a Notebook Video Card

How to Install a Notebook Video Card

Most notebook computers are designed for programs such as word-processing software that does not require advanced graphics capabilities. If you want to turn your notebook into a gaming machine or use higher-end graphic editing software, you may want to install a new video card. Although opening up your laptop is more complicated than opening a desktop, it can be done at home.

1). Power off the computer entirely and remove the power cable. Close the top lid and turn the entire unit over so you can see the bottom of the case. Hold down the battery release button and push the battery out of the case. Check the manual that came with your laptop and see if the screws on the bottom of the case hold the motherboard to the keyboard. Remove them if they do. Turn the laptop back over.

2). Open the lid so you can see the LCD screen. Check the keyboard and see if it has a blank key on the bottom right side. Slide a thin object such as a flat head screwdriver underneath the key. Wiggle up and down until the keyboard pops out. Slide the object under the plastic bezel above the keyboard, if you don't have a blank key and pop the bezel out.

3). Remove the cable connecting the keyboard to the notebook motherboard and pull the keyboard out. Remove the plastic bezel above the keyboard and set it aside. Use a screwdriver to remove the screws holding the hinges into place. Pull out the hinges.

4). Check to see if there are additional components preventing you from reaching the video card, such as the case fan or RAM modules. Remove the components so that the video card can be pulled out.

5). Pull out the screws holding the video card in place and remove it from the motherboard. Slide the new video card into the open slot and attach the screws. Re-connect all the components, place the hinges back on, and put the keyboard and bezel back into place. Pop the battery back in and power on the notebook.

Read More

How to Install Laptop Skins

How to Install Laptop Skins

Over the years, the Personal Computer (or PC) has gone from the bulky, cumbersome box and monitor to the lightweight, portable laptop. As the styles have changed, so have the ways to personalize the laptop. One such way is the laptop skin.

The main purpose of the laptop skin is to protect your laptop. Secondary, custom laptop skins not only protect the laptop, it can help you add your own personal touch to your laptop computer.

1). Using a damp cloth, clean the outside of your laptop

2). Once you're done cleaning your unit, you should measure the length and width of the cover for your laptop.

3). Take the length and width measurements of the laptop's cover for the markings of your laptop skin.

4). Taking a pen knife, do away with any excess from the laptop skin.

5). You should carefully peel off the laptop skin's corner.

6). Peel off the laptop skin and apply it to the laptop cover. Press to eliminate air bubbles.

Read More

How to Set Up a Computer to a Projector

How to Set Up a Computer to a Projector

If you have a newer video card, you probably already have a second video out port. Laptops usually come with a video out port on the back. If you don't have a second video out port, you can always buy a splitter. A splitter will split a cable from one port into two, just make sure you match up the type DVI or VGA.

Instructions to setup projector

1). Turn your computer off.

2). Connect the cable from the computer to the projector. If you want to have your monitor to be hooked up as well, connect a splitter to the video out port (DVI or VGA). You can also just hook the projector up to the second port on your video card (If you have one) or if you have a laptop, you can connect to the video out port on the back.

3). Turn the computer.

4). Turn on the projector. Most projectors have an auto detect function, that will detect a video signal and auto configure the projector to display that signal. If you have a laptop, you have to hit a function key to activate the second display. Usually this is FN Key + F5 or one of the F Keys across the top of the laptop keyboard. It looks like two squares, one empty and one with something in it.

5). Adjust the focus, brightness, contrast, and color on the projector.

6). Aim the projector at something white. Try not to aim it at something highly reflective.

7). Step back, load up your favorite game or video.

Read More