Pages

Get Updates Directly In Your Inbox

Friday, October 22, 2010

Partition External Hard Drive

Partition External Hard Drive
Most of the external hard drives come with one preformatted partition ready to use. But if it didn't, or if you don't like the default setup, changing it is easy. And of course you'll want to do this before you load that disk up with data.
Start by Right clicking on My Computer and then clicking on Manage. In the resulting application window, click on Disk Management in the left hand pane. You should see something similar to this:



At the top you'll see all the logical disks on your system listed alphabetically by label by default. Below that you'll see a graphical representation of all the physical disk drives known to your system. If a physical drive has more than one partition those partitions will be shown together on the single physical drive.
In this example, my drive "E:" is an external USB drive. It happens to be my backup drive where nightly backups are stored.
Remove the Existing Partition
Let's assume for a moment that I'm unhappy with the current configuration of the partitions on my external drive and want to change it. My first step would be to remove the existing partition.
You need to right click on the drive in the lower pane, and you should see this menu:



Important: the next step will delete everything on the drive. Make sure this is what you want before proceeding.

Click on Delete Partition
The representation of the drive should change from "Healthy" to "Unallocated".
Partition the Drive
Right click on the drive again, and the option that was once "Delete Partition" is now "New Partition". Click on that to set up your new partition.
You'll then be asked to select "Primary" or "Extended" partition. Primary is sufficient unless you plan to put more than 4 partitions on this hard disk. You'll then also be asked how much of the space to allocate for the new partition you're creating.
Typically, I recommend simply allocating the entire space to a single partition. You can, if you like, allocate less than the maximum space to the partition you're creating now so that you have room for additional partitions on the same hard disk. Remember that each partition, once formatted, will appear as its own logical disk (C:, D:, E: and so on.)
You'll then be asked about formatting, which I'll cover below.
Once you've formatted the new partition, it'll appear as "Healthy", and any leftover space will continue to display "Unallocated". You can then repeat this partitioning process on that unallocated space until your entire drive has been allocated.
Format the Drive
Assuming that partitioning has been performed above, or you don't want to change the partitioning of your drive, the next thing to change would be the format of the drive.
Important: formatting a drive will delete everything on the drive. Make sure this is what you want before proceeding.

Right click on the drive that you wish to format, click on the Format item, press OK on the dire warning, and you'll get a dialog similar to this:


Let's look at each of those options:
·         Volume Label - is the name that will appear when the logical disk is displayed in Windows Explorer, in File selection dialog boxes and in other situations. It's a convenient way to identify disks by name rather than only by letter. The label is an attribute of the drive, so particularly on removable drives the label stays the same no matter what machine you plug it into, or what drive letter it gets assigned.
·         File System - I recommend NTFS unless the drive is going to be used by older versions of Windows, or by non-Windows systems. There's debate as to whether NTFS is faster (I think it is), but it also supports additional security features like file permissions, and can typically make more efficient use of larger disks.
·         Allocation unit size - can be left at "Default".
·         Perform a Quick format - for the type of format we're doing here, I actually recommend leaving this unchecked. A quick format only writes the bare minimum of information to establish the disk's new configuration. If the disk has been in use for a while, that's fine and is what I typically recommend. However, when going through the effort of formatting a new disk I suggest using this opportunity to have the format process actually write the entire drive. It may take a while.
·         Enable file and folder compression - I have mixed feelings about this. The overhead of compressing and decompressing files is no longer significant with today's processor speeds. However I have concerns about data recovery if the disk ever experiences an issue. My concerns may not be valid, but ultimately, I never run with compression on any of my hard disks, preferring instead to compress the individual files as appropriate instead. So many file formats, like most audio and video files, are already compressed that the compression offered by the file system is often negligible. I leave this unchecked.
That's it. Press OK and after a period of time you'll have a formatted, ready-to-use disk.

0 comments:

Related Posts Plugin for WordPress, Blogger...

Search This Blog

Followers

Twitter Delicious Facebook Digg Stumbleupon Favorites More