How to Install an ATI Radeon Video Card
ATI Radeon video cards are high end dedicated graphics cards produced by AMD (Advanced Micro Devices). ATI Radeon cards are used primarily for computer gaming and playing HD video, as many cards have HDMI and DVI ports to connect to HDTVs. To install an ATI Radeon card, a computer must have a PCI express slot, and the appropriate power connector for the card.
To install the ATI Radeon Video Card, follow the below steps:
1. Turn off the computer and unplug all the cords.
2. Open the case by unscrewing the screws on the right hand side of the case. This will release the side panel covering the motherboard.
3. Locate a PCI express slot. This slot is longer than the other expansion slots (PCI and AGP slots), Some motherboards have two PCI express slots.
4. Take off the slot cover. Each unused expansion bay on your computer will likely be covered by a metal cover which is mounted in place by a screw just inside the computer from the back of the case. Take out this screw to remove the cover.
5. Install the card. Align the card in the PCI express slot, making sure it is square with the slot, then push it in applying pressure to either side of the card, so it pushes in with uniform force. The card should pop into position and line up flush with the back of the case. You can screw the slot cover screw back in to secure the card.
6. Attach the card's power cord, if necessary. Some of most powerful video cards require a special PCI express power cord to be connected to it from the power supply.
7. Close the case, plug the cords back in and power on the computer.
8. Insert the driver CD into your CD drive and install the drivers appropriate for your operating system. ATI Radeon cards should come with a driver installation CD. You can also download drivers from AMD's website.
9. Restart your computer.
0 comments:
Post a Comment