How to install blu-ray drive
Blu-ray:

Install Blu-ray drive
Installing the Blu-ray drive is a cinch: A Serial ATA (SATA) interface eliminates hassles regarding jumper settings or IDE cable positioning. Our PC had just one 5.25-inch drive bay, so we unscrewed the IDE DVD burner in it, detached its IDE cable and four-pin Molex power lead, and pulled it out. (If your case uses rails to mount drives, detach them, or look for spares inside the case.) We also removed the IDE cable entirely, since we had no other IDE drives. (Important: If your IDE cable has a second drive on it make sure the drive resides on the cable's end connector and that its jumper is set to Master or Cable Select.)

Finally, check that the drive drawer has clearance to open. The BWU200S's disc tray has a face bigger than most, and because our PC case had a door covering the optical-drive bay, the BWU200S's drawer couldn't pass through. We had to carefully remove its face. (It snaps off vertically.)
If you don't want to go through the hassle of opening your case, LaCie offers an external Blu-ray burner, and Buffalo Technology has announced that it will be introducing one in the near future. These drives make bringing Blu-ray to your PC as easy as plugging in a USB cable.
4 comments:
We have Nero software to burn CD/DVD. Will that work even for Blue Ray Disc?
Hi PC optimization,
What version os Nero you have ? You need Nero 10..
are there any issues with less ram ?
Minimum is 512 MB with WinXP and 1 GB with WinVista.
Post a Comment